The latest Cisco CCDE 352-001 dumps questions and Answers | Real and effective

We share the latest exam dumps throughout the year to help you improve your skills and experience! The latest Cisco CCDE 352-001 exam dumps, online exam Practice test to test your strength, Cisco 352-001 “352-001 CCDE Design Expert Written Exam, v2.1” in https://www.leads4pass.com/352-001.html Update the exam content throughout the year to ensure that all exam content is authentic and valid. 352-001 PDF Online download for easy learning.

[PDF] Free Cisco CCDE 352-001 pdf dumps download from Google Drive: https://drive.google.com/open?id=1tcZ_OsnFa2Zc0yXCf2bj3NUs_f2NbQXi

[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1CMo2G21nPLf7ZmI-3_hBpr4GDKRQWrGx

352-001 CCDE – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/ccde.html

Cisco CCDE written exam will validate that professionals have the expertise to gather and clarify network functional requirements, develop network designs to meet functional specifications, develop an implementation plan, convey design decisions and their rationale, and possess expert-level network infrastructure knowledge.

Free test Cisco CCDE 352-001 Exam questions and Answers

QUESTION 1
Which option is a BFD design consideration?
A. BFD should not be used with RSVP-TE backup tunnels.
B. BFD echo mode may reduce convergence time.
C. BFD does not support sessions over MPLS LSPs.
D. BFD is supported on indirectly connected peers.
Correct Answer: B

QUESTION 2
Refer to the exhibit.lead4pass 352-001 exam question q2

As part of your design to monitor reachable services, a route health injector has just been deployed on the network. The
route health injector injects /32 host routes into BGP with the next hop of 192.18.0.2, but the /32 routes are not being
installed into the RIB or FIB of Router A. Which BGP feature must be deployed to make be deployed to make the design
to work?
A. BGP community attributes
B. MP-BGP
C. BGP AS-Path prepending
D. eBGP multihop attribute
Correct Answer: A

QUESTION 3
A mobile service provider wants to design and deploy an Ethernet service with similar physical link failover/failback
characteristics on the active/backup links as APS/MSP SONET. Which Layer 2 service addresses this design
requirement?
A. Ethernet Pseudowires
B. FlexLink
C. MLPPP
D. Port-Channel
Correct Answer: B

QUESTION 4
Which two statements about AToM are true? (Choose two)
A. It encapsulates Layer 2 frames at the egress PE
B. When using AToM, the IP precedence filed is not copied to the MPLS packet
C. AToM supports connecting different L2 technologies using interworking option
D. The loopback address of the PE router must be either /24 or /32
E. It provides support for L2VPN features on ATM interfaces
Correct Answer: CE

QUESTION 5
Which network management tool should a network manager consult in order to pinpoint the cause of a routing recursion
error?
A. debug (for BGP output)
B. syslog (for BGP errors)
C. RMON events group
D. SNMP routing traps
Correct Answer: A

QUESTION 6
What are two reasons to choose L2TPv3 over other technologies for a VPN solution? (Choose two.)
A. The VPN solution does not contain MPLS on the network core.
B. The VPN solution should support Frame Relay to Ethernet pseudowire connections.
C. The VPN solution requires multipoint Ethernet LAN service.
D. The VPN solution should be industry-standard.
Correct Answer: AD

QUESTION 7
You are designing an IEEE 802.1X solution for a customer, where the network supports a large number of IP phones
and printers.
You plan to configure MAC address bypass for the phones and printers. What is your primary design and security
concern?
A. the additional AAA traffic on the network
B. the placement of the AAA server
C. the potential of MAC address spoofing
D. the scaling of the MAC address database
Correct Answer: C

QUESTION 8
What is a characteristic of traffic shaping?
A. It minimizes traffic transmission intervals.
B. It remarks excess packets above the committed rates.
C. It delays and can drop excess traffic.
D. It classifies traffic based on certain characteristics.
Correct Answer: C

QUESTION 9
An enterprise company needs to transport multicast traffic between its hub-and-spoke WAN routers over an MPLS
Layer 3 VPN provider that does not currently support multicast. Which option describes how this enterprise how this
enterprise can achieve this requirement in a cost-effective way?
A. Use MSDP over the WAN.
B. Enable multicast routing on the WAN physical and tunnel interfaces.
C. Create multicast-enabled GRE tunnels over the WAN between the hub-and-spoke routers.
D. Provide an Internet link to each site and use DMVPN over the Internet.
Correct Answer: C

QUESTION 10
Which three options are important functions of IPv6 first-hop security? (Choose three.)
A. implements a broadcast-control mechanism
B. limits IPv6 route advertisement in the network
C. suppresses excessive multicast neighbor discovery
D. prevents IPv6 packet fragmentation
E. prevents rogue DHCP servers from assigning IPv6 addresses
Correct Answer: BCE

QUESTION 11
The Database team will deploy a new clustering technology that uses IPv4, multicast- based data replication, where the
servers listen and transmit at the same time on multiple groups. Multicast is not being run on the current network and
there are no plans to enable it. New Layer 2 switches will be purchased to connect new servers in order to keep
multicast traffic off the existing network. Which two features should the new switches support to provide good multicast
performance? (Choose two.)
A. IGMP snooping
B. PIM snooping
C. MLD snooping
D. IGMP querier
E. Bidirectional PIM
Correct Answer: AD

QUESTION 12
A Company has these requirements for access to their wireless and wired corporate LANs using 802.1x
Clients devices that corporate assets and have joined the active directory domain are allowed access
Personal devices must be not allowed access
Clients and access servers must be mutually authenticated.
Which solution meets these requirements?
A. Protected EAP/Microsoft CHAP v2 with user authentication
B. EAP-TLS with machine authentication
C. EAP-TLS with user authentication
D. Protected EAP/Microsoft CHAP v2 with Machine authentication
Correct Answer: B

QUESTION 13
What are two reasons for instrumenting your network and network devices to collect performance data? (Choose two.)
A. to determine the impact of jitter and latency on application performance
B. to enable capacity planning decisions
C. to route traffic around constrained choke points in the network
D. to determine the locations at which QoS needs to be implemented
Correct Answer: BD

We share 13 of the latest Cisco CCDE 352-001 exam dumps and 352-001 pdf online download for free. Now you know what you’re capable of! If you’re just interested in this, please keep an eye on “Examineeverything.org” blog updates! If you want to get the Cisco CCDE 352-001 Exam Certificate: https://www.leads4pass.com/352-001.html (Total questions: 640 Q&A).

Related 352-001 Popular Exam resources

title pdf youtube 352-001 CCDE – Cisco lead4pass
Cisco 352-001 lead4pass 352-001 dumps pdf lead4pass 352-001 youtube 352-001 CCDE – Cisco https://www.leads4pass.com/352-001.html
Cisco CCDE       https://www.leads4pass.com/352-001.html
      https://www.leads4pass.com/352-011.html

Lead4pass Promo Code 12% Off

lead4pass 352-001 coupon

Why Choose Lead4pass?

Lead4Pass helps you pass the exam easily! We compare data from all websites in the network, other sites are expensive,
and the data is not up to date, Lead4pass updates data throughout the year. The pass rate of the exam is above 98.9%.

why lead4pass 352-001 exam dumps