Latest Lead4Pass CCNA 200-301 dumps Update Sharing

CCNA 200-301 dumps

Lead4Pass CCNA 200-301 dumps updated, containing 1297 latest topic exam questions and answers, reviewed, corrected, and actually verified by the Lead4Pass Cisco team to meet the CCNA certification exam requirements!

Now! Download CCNA 200-301 dumps with PDF and VCE: https://www.leads4pass.com/200-301.html, practice completing CCNA 200-301 topic exam questions. 100% Guaranteed Success on Your CCNA 200-301 Exam!

Share part of the topic exam questions from Lead4Pass CCNA 200-301 dumps

FromNumber of exam questionsAssociated certificationLast updated
Lead4Pass15CCNA, CCNP EnterpriseCCNA 200-301 dumps
Topic Question 1:

Refer to the exhibit.

CCNA 200-301 dumps topic exam questions 1

A network engineer is configuring a wireless LAN with Web Passthrough Layer 3 Web Policy. Which action must the engineer take to complete the configuration?

A. Set the Layer 2 Security to 802.1X.

B. Enable TKIP and CCMP256 WPA2 Encryption.

C. Enable the WPA Policy.

D. Set the Layer 2 Security to None.

Correct Answer: D

Navigate to WLAN > Edit > Security > Layer2, and select None for Layer 2 Security:

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116879-configure-wlc-00.html

Topic Question 2:

Refer to the exhibit.

CCNA 200-301 dumps topic exam questions 2

What is the reason for poor performance on the network interface?

A. The interface is receiving excessive broadcast traffic.

B. The cable connection between the two devices is faulty.

C. The interface is operating at a different speed than the connected device.

D. The bandwidth setting of the interface is misconfigured

Correct Answer: B

Here we see a large number of input errors and CRC errors.

CCNA 200-301 dumps topic exam questions 2-1

Topic Question 3:

What is a function of a southbound API?

A. Use orchestration to provision a virtual server configuration from a web server

B. Automate configuration changes between a server and a switching fabric

C. Manage flow control between an SDN controller and a switching fabric

D. Facilitate the information exchange between an SDN controller and an application

Correct Answer: C

Topic Question 4:

What is represented by the word “R29” within this JSON schema?

CCNA 200-301 dumps topic exam questions 4

A. array

B. key

C. object

D. value

Correct Answer: D

Topic Question 5:

Refer to the exhibit.

CCNA 200-301 dumps topic exam questions 5

What is the next-hop IP address for R2 so that PC2 reaches the application server via EIGRP?

A. 192.168.30.1

B. 10.10.10.6

C. 10.10.10.5

D. 192.168.20.1

Correct Answer: B

Topic Question 6:

Refer to the exhibit. What configuration on RTR-1 denies SSH access from PC-1 to any RTR-1 interface and allows all other traffic?

CCNA 200-301 dumps topic exam questions 6

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: A

Topic Question 7:

Refer to the exhibit.

CCNA 200-301 dumps topic exam questions 7

Which command must enable a floating default route on router A?

A. ip route 0.0.0.0 0.0.0.0 192.168.1.2

B. ip default-gateway 192.168.2.1

C. ip route 0.0.0.0 0.0.0.0 192.168.1.2 10

D. ip route 0.0.0.0 0.0.0.0 192.168.2.1 10

Correct Answer: C

Topic Question 8:

Which value is the unique identifier that an access point uses to establish and maintain wireless connectivity to wireless network devices?

A. VLANID

B. SSID

C. RFID

D. WLANID

Correct Answer: B

The SSID is a unique identifier that wireless networking devices use to establish and maintain wireless connectivity. Multiple access points on a network or subnetwork may use the same SSIDs.

Topic Question 9:

Refer to the exhibit. How will the router handle a packet destined for 192.0.2.156?

CCNA 200-301 dumps topic exam questions 9

A. The router will forward the packet via either Serial0 or Serial1.

B. The router will return the packet to its source.

C. The router will forward the packet via Serial 2.

D. The router will drop the packet.

Correct Answer: C

Topic Question 10:

Refer to the exhibit. A network technician is asked to design a small network with redundancy. The exhibit represents this design, with all hosts configured in the same VLAN. What conclusions can be made about this design?

CCNA 200-301 dumps topic exam questions 10

A. This design will function as intended.

B. Spanning tree will need to be used.

C. The router will not accept the addressing scheme.

D. The connection between switches should be a trunk.

E. The router interfaces must be encapsulated with the 802.1Q protocol.

Correct Answer: C

Each interface on a router must be in a different network. If two interfaces are in the same network, the router will not accept it and show an error when the administrator assigns it.

Topic Question 11:

What are two characteristics of a small office/home office connection environment? (Choose two.)

A. It requires 10Gb ports on all uplinks.

B. It supports between 50 and 100 users.

C. It supports between 1 and 50 users.

D. It requires a core, distribution, and access layer architecture.

E. A router port connects to a broadband connection.

Correct Answer: CE

Topic Question 12:

Which of the following dynamic routing protocols are Distance Vector routing protocols?

A. IS-IS

B. EIGRP

C. OSPF

D. BGP

E. RIP

Correct Answer: BE

Topic Question 13:

With REST API, which standard HTTP header tells a server which media type is expected by the client?

A. Accept-Encoding: gzip. deflate

B. Accept-Patch: text/example; charset=utf-8

C. Content-Type: application/json; charset=utf-8

D. Accept: application/json

Correct Answer: D

Accept header is a way for a client to specify the media type of the response content it is expecting and Content-type is a way to specify the media type of request being sent from the client to the server.

Topic Question 14:

What is the purpose of configuring different levels of syslog for different devices on the network?

A. to rate-limit messages for different seventy levels from each device

B. to set the severity of Syslog messages from each device

C. to identify the source from which each syslog message originated

D. to control the number of Syslog messages from different devices that are stored locally

Correct Answer: B

The purpose of configuring different levels of syslog for different devices on the network is to set the severity of Syslog messages from each device.

Topic Question 15:

DRAG DROP

Match the functions to the corresponding layers.

Select and Place:

CCNA 200-301 dumps topic exam questions 15

Correct Answer:

CCNA 200-301 dumps topic exam questions 15-1


Lead4Pass CCNA 200-301 dumps cover the complete CCNA certification topic exam questions! You can experience some of the latest CCNA 200-301 dumps topic exam questions through the online practice,
Help you experience the real scene in advance!

More importantly! Download CCNA 200-301 dumps with PDF and VCE: https://www.leads4pass.com/200-301.html, practice completing CCNA 200-301 topic exam questions. Helping you pass the CCNA 200-301 exam with ease!

Latest updated CCNA 200-301 dumps from Lead4Pass

Candidates use the latest updated CCNA 200-301 dumps from Lead4Pass: https://www.leads4pass.com/200-301.html, to help you get past the hurdle and successfully pass the 200-301 CCNA exam.

Lead4Pass 200-301 dumps provide PDF files and a VCE exam engine to help you practice 200-301 CCNA exam questions quickly and easily. The latest updated 200-301 dumps contain 294 exam questions and answers, verified by IT experts to be true and effective.

Share 13 CCNA 200-301 dumps PDF:https://drive.google.com/file/d/1hqDUcvc1vHJMiDa15KhDD1Jjp3q8j0hA/

Read CCNA 200-301 dumps exam questions and answers online:

Number of exam questionsRelease timeExam nameFromPrevious issue
15Sep 20, 2022Implementing and Administering Cisco Solutions (CCNA)Lead4PassSep 2, 2022
New Question 1:

DRAG DROP

A network engineer is configuring an OSPFv2 neighbor adjacency. Drag and drop the parameters from the left onto their required categories on the right. Not all parameters are used.

Select and Place:

CCNA 200-301 dumps exam q1

Correct Answer:

CCNA 200-301 dumps exam answer q1

New Question 2:

Drag and drop the threat-mitigation techniques from the left onto the types of threat or attack they mitigate on the right.

Select and Place:

CCNA 200-301 dumps exam q2

Correct Answer:

CCNA 200-301 dumps exam answer q2

Double-Tagging attack:

CCNA 200-301 dumps exam answer q2-1

In this attack, the attacking computer generates frames with two 802.1Q tags. The first tag matches the native VLAN of the trunk port (VLAN 10 in this case), and the second matches the VLAN of a host it wants to attack (VLAN 20).

When the packet from the attacker reaches Switch A, Switch A only sees the first VLAN 10 and it matches with its native VLAN 10 so this VLAN tag is removed. Switch A forwards the frame out all links with the same native VLAN 10. Switch B

receives the frame with a tag of VLAN 20 so it removes this tag and forwards it out to the Victim’s computer.

Note: This attack only works if the trunk (between two switches) has the same native VLAN as the attacker.

To mitigate this type of attack, you can use VLAN access control lists (VACLs, which apply to all traffic within a VLAN. We can use VACL to drop attacker traffic to specific victims/servers) or implement Private VLANs.

ARP attack (like ARP poisoning/spoofing) is a type of attack in which a malicious actor sends falsified ARP messages over a local area network as ARP allows a gratuitous reply from a host even if an ARP request was not received. This

results in the linking of an attacker\’s MAC address with the IP address of a legitimate computer or server on the network. This is an attack based on ARP which is at Layer 2. Dynamic ARP inspection (DAI) is a security feature that validates ARP packets in a network which can be used to mitigate this type of attack.

New Question 3:

Drag and drop the Cisco Wireless LAN Controller security settings from the left onto the correct security mechanism categories on the right.

Select and Place:

CCNA 200-301 dumps exam q3

Correct Answer:

CCNA 200-301 dumps exam answer q3

Layer 2 Security Mechanism includes WPA+WPA2, 802.1X, Static WEP, and CKIP while Layer 3 Security Mechanisms (for WLAN) includes IPSec, VPN Pass-Through, Web Passthrough …

Reference: https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/106082-wlc-compatibility-matrix.html

New Question 4:

Drag and drop the network protocols from the left onto the correct transport services on the right.

Select and Place:

CCNA 200-301 dumps exam q4

Correct Answer:

CCNA 200-301 dumps exam answer q4

New Question 5:

DRAG DROP

Refer to the exhibit.

CCNA 200-301 dumps exam q5

Drag and drop the networking parameters from the left onto the correct values on the right.

Select and Place:

CCNA 200-301 dumps exam q1-1

Correct Answer:

CCNA 200-301 dumps exam answer q1

The “IP route” and “IP addr show eth1” are Linux commands.

1.

“IP route”: display the routing table

2.

“IP addr show eth1”: get depth information (only on eth1 interface) about your network interfaces like IP Address, MAC Address information

New Question 6:

DRAG DROP

Drag and drop the AAA functions from the left onto the correct AAA services on the right.

Select and Place:

CCNA 200-301 dumps exam q6

Correct Answer:

CCNA 200-301 dumps exam answer q6

New Question 7:

Drag and drop the IPv4 network subnets from the left onto the correct usable host ranges on the right.

Select and Place:

CCNA 200-301 dumps exam q7

Correct Answer:

CCNA 200-301 dumps exam answer q7

This subnet question requires us to grasp how to subnet very well. To quickly find out the subnet range, we have to find out the increment and the network address of each subnet. Let\’s take an example with the subnet 172.28.228.144/18:

From the /18 (= 1100 0000 in the 3rd octet), we find out the increment is 64. Therefore the network address of this subnet must be the greatest multiple of the increment but not greater than the value in the 3rd octet (228). We can find out the 3rd octet of the network address is 192 (because 192 = 64 * 3 and 192 < 228) -> The network address is 172.28.192.0. So the first usable host should be 172.28.192.1 and it matches with the 5th answer on the right. In this case, we don\’t need to calculate the broadcast address because we found the correct answer.

Let\’s take another example with subnet 172.28.228.144/23 -> The increment is 2 (as /23 = 1111 1110 in 3rd octet) -> The 3rd octet of the network address is 228 (because 228 is the multiply of 2 and equal to the 3rd octet) -> The network address is 172.28.228.0 -> The first usable host is 172.28.228.1. It is not necessary but if we want to find out the broadcast address of this subnet, we can find out the next network address, which is 172.28. (228 + the increment number).0 or

172.28.230.0 then reduce 1 bit -> 172.28.229.255 is the broadcast address of our subnet. Therefore the last usable host is 172.28.229.254.

New Question 8:

Drag and drop the descriptions of file-transfer protocols from the left onto the correct protocols on the right.

Select and Place:

CCNA 200-301 dumps exam q8

Correct Answer:

CCNA 200-301 dumps exam answer q8

New Question 9:

Drag-drop the descriptions from the left onto the correct configuration-management technologies on the right.

Select and Place:

CCNA 200-301 dumps exam q9

Correct Answer:

CCNA 200-301 dumps exam answer q9

The focus of Ansible is to be streamlined and fast and to require no node agent installation. Thus, Ansible performs all functions over SSH. Ansible is built on Python, in contrast to the Ruby foundation of Puppet and Chef.

TCP port 10002 is the command port. It may be configured in the Chef Push Jobs configuration file. This port allows Chef Push Jobs clients to communicate with the Chef Push Jobs server.

Puppet is an open-source configuration management solution, which is built with Ruby and offers custom Domain Specific Language (DSL) and Embedded Ruby (ERB) templates to create custom Puppet language files, offering a declarative-

paradigm programming approach.

A Puppet piece of code is called a manifest and is a file with a .pp extension.

New Question 10:

Drag and drop the WLAN components from the left onto the correct descriptions on the right.

Select and Place:

CCNA 200-301 dumps exam q10

Correct Answer:

CCNA 200-301 dumps exam answer q10

The service port can be used for management purposes, primarily for out-of-band management. However, AP management traffic is not possible across the service port. In most cases, the service port is used as a “last resort” means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.

A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller. The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol (DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the DNS gateway hostname used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.

Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/ports_and_interfaces.html

New Question 11:

Drag and drop the functions from the left onto the correct network components on the right.

Select and Place:

CCNA 200-301 dumps exam q11

Correct Answer:

CCNA 200-301 dumps exam answer q11

Refer to the exhibit.

CCNA 200-301 dumps exam answer q11-1

New Question 12:

Drag and drop the routing table components on the left onto the corresponding letter from the exhibit on the right. not all options are used.

Select and Place:

CCNA 200-301 dumps exam q12

Correct Answer:

CCNA 200-301 dumps exam answer q12

New Question 13:

Drag and drop each broadcast IP address on the left to the Broadcast Address column on the right. Not all options are used.

Select and Place:

CCNA 200-301 dumps exam q13

Correct Answer:

CCNA 200-301 dumps exam answer q13

New Question 14:

An interface has been configured with the access list that is shown below.

CCNA 200-301 dumps exam q14

On the basis of that access list, drag each information packet on the left to the appropriate category on the right.

Select and Place:

CCNA 200-301 dumps exam answer q14

Correct Answer:

CCNA 200-301 dumps exam answer q14-1

New Question 15:

Order the DHCP message types as they would occur between a DHCP client and a DHCP server.

Select and Place:

CCNA 200-301 dumps exam q15

Correct Answer:

CCNA 200-301 dumps exam answer q15

Download 13 CCNA 200-301 dumps PDF:https://drive.google.com/file/d/1hqDUcvc1vHJMiDa15KhDD1Jjp3q8j0hA/

Candidates studying the CCNA 200-301 dumps exam questions above can help them improve their exam experience, but this is only a warm-up.

You are welcome to download the latest updated CCNA 200-301 dumps: https://www.leads4pass.com/200-301.html, A truly effective route for candidates to pass the 200-301 CCNA exam.