[Updated 2022]Cisco CCT Data Center 010-151 exam dumps best resources, easily pass 010-151 exam

Where do I get the Cisco 010-151 exam questions? ExamineeVeryThing shares the latest and most effective Cisco CCT Data Center 010-151 exam questions and answers, online practice tests, and the most authoritative Cisco exam experts update 010-151 exam questions throughout the year.
Get the full 010-151 exam dumps selection: https://www.lead4pass.com/010-151.html (72 Q&As)[Updated 2022 Total Questions: 136 Q&A]. Pass the exam with ease!

Cisco 010-151 Exam Video

Table of Contents:

Latest Cisco CCT Data Center 010-151 google drive

[PDF] Free Cisco 010-151 pdf dumps download from Google Drive: https://drive.google.com/open?id=1q-BVVW4uYdXXeS_wL1gZQPx3m3tYgvEV

010-151 DCTECH – Cisco:https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/dctech.html

The Cisco Certified Technician (CCT) for Data Center validates a technician’s competency in the following areas;

  • Basic Cisco NX-OS configuration
  • Cisco Data Center products and hardware components with an emphasis on the Cisco Unified Computing System (UCS).

The curriculum covers remedial services (HW break-fix) on Cisco Data Center products, including hardware replacement, software, and configuration backup and restores, check the safety and environmental requirement, recognize connection type and cable requirement,
and perform basic physical layer troubleshooting. The Cisco Certified Technician (CCT) should be competent in the following areas;
basic Cisco NX-OS configuration, Cisco Data Center products, and hardware components.

The Cisco Certified Technician should be able to perform remedial services (HW break-fix) on Cisco Data Center products, including software and configuration backup and restore, check the safety and environmental requirement, recognize connection type and cable requirement, and perform basic physical layer troubleshooting.

[Updated 2022] 010-151 Dumps exam questions and answers

Question 1:

Which method does FCIP use to enable connectivity of geographically distributed Fibre Channel SANs over IP?

A. routing

B. tunneling

C. handshaking

D. transporting

Correct Answer: B


Question 2:

Which fiber optic cable type is used most often with a Subscriber connector?

A. dual-mode

B. single-mode

C. straight-mode

D. multi-mode

E. subscriber-mode

Correct Answer: B


Question 3:

Which type of connection across the network does a SAN allow for multiple servers to access an unlimited amount of storage devices?

A. any-to-many

B. many-to-any

C. any-to-any

D. any-to-one

E. one-to-any

F. one-to-one

Correct Answer: C


Question 4:

Which two statements about PCIe are true? (Choose two.)

A. The PCIe link is built around dedicated unidirectional couples of serial, point-to-point connections known as lanes.

B. You can install a PCI Express x8 adapter into an x4 slot.

C. The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path.

D. The PCIe 1.0 standard doubles the transfer rate compared to PCIe 2.0.

E. A link that is composed of four lanes is called an x4 link.

Correct Answer: AE


Question 5:

Where do you find the model number of a Cisco MDS 9200 Series chassis?

A. on the top front of the chassis next to the serial number

B. on the bottom front of the chassis next to the Cisco logo

C. on the top front of the chassis next to the Cisco logo

D. on the bottom front of the chassis next to the serial number

Correct Answer: C

[Updated 2022] Get more Cisco 010-151 exam questions and answers

Latest updates Cisco 010-151 exam practice questions

What is the maximum number of supervisor modules that the Cisco MDS 9710 Switch supports?
A. 1
B. 2
C. 4
D. 6
E. 8
Correct Answer: B

Which two statements about DIMM replacement in Cisco UCS Servers are true? (Choose two.)
A. In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel.
B. Rack-mount and blade servers have memory fault LEDs that indicate which DIMM requires attention.
C. In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on).
D. If the memory in a server is not fully populated, you can install DIMMs in any open slot.
Correct Answer: AC

Which two statements about the Ethernet media are true? (Choose two.)
A. A twisted-pair cable system has each pair of wires twisted together to reduce electromagnetic interference.
B. Compared to multimode fiber, the single-mode fiber is designed for shorter distances with higher cost.
C. 40 Gigabit Ethernet twinax cables deploy Enhanced Quad Small Form Factor Pluggable (QSFP+) connectors.
D. The twinax cables can be found in either a shielded twisted-pair or an unshielded twisted-pair variation.
Correct Answer: AC

Which Cisco NX-OS command displays kernel uptime?
A. show module
B. show version
C. show license
D. show boot
E. show interface
Correct Answer: B

Which command-line interface mode is best described by this prompt?
UCS-switch-A (nxos)#
A. maintenance mode
B. EXEC mode
C. local management mode
D. global configuration mode
E. Cisco IOS mode
Correct Answer: B

What is the maximum distance that the 40GBASE-LR4 Ethernet standard can span?
A. 550 m
B. 10 km
C. 40 km
D. 80 km
Correct Answer: B

Refer to the exhibit.lead4pass 010-151 exam question q7

Where is the best place to see the power supply status of the blade server enclosure?
A. A – Chassis 1
B. B – Chassis 1 – PSUs
C. C – Chassis1 – Servers
D. D – Rack-Mounts – Servers
E. E – Fabric Interconnects A – PSUs
Correct Answer: B

Which Cisco Nexus 5000 Series model supports 1/10G BASE-T ports?
A. Cisco Nexus 5548P
B. Cisco Nexus 5548UP
C. Cisco Nexus 5596UP
D. Cisco Nexus 5596T
Correct Answer: D

Which two statements about the Cisco Nexus 5596UP switch are true? (Choose two.)
A. Its power supplies and fan trays are hot-swappable.
B. It supports unified ports.
C. It is offered in a one-rack-unit form factor.
D. It has one expansion slot.
E. It supports up to 96 10G BASE-T ports.
Correct Answer: AB

Refer to the exhibit.lead4pass 010-151 exam question q10

Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?
A. MDS 9509
B. MDS 9513
C. MDS 9710
D. MDS 9506
Correct Answer: C

The Ethernet specification details several different fiber optic media types. What is the wire transmission speed for
100BASE-FX Ethernet?
A. 10 Mb/s
B. 100 Mb/s
C. 1000 Mb/s
D. 10000 Mb/s
Correct Answer: B

Which device provides analysis of Fibre Channel traffic without any network disruption?
A. Cisco MDS 9000 Data Analyzer Adapter
B. Cisco MDS 9000 Port Analyzer Adapter
C. Cisco MDS 9000 Channel Analyzer Device
D. Cisco MDS 9000 Channel Analyzer Adapter
Correct Answer: B

Which action should the administrator take before physically removing a blade server for maintenance or replacement?
A. Force the server to shut down.
B. Disassociate the service profile.
C. Decommission the server.
D. Perform a graceful shutdown of the server.
Correct Answer: C

Related 010-151 Popular Exam resources

title pdf youtube Cisco lead4pass Lead4Pass Total Questions
Cisco CCT Data Center lead4pass 010-151 dumps pdf lead4pass 010-151 youtube 010-151 DCTECH – Cisco https://www.lead4pass.com/010-151.html 136 Q&A

Lead4Pass Year-round Discount Code

lead4pass coupon

What are the advantages of Lead4pass?

Lead4pass employs the most authoritative exam specialists from Cisco, Microsoft, CompTIA, IBM, EMC, etc. We update exam data throughout the year. Highest pass rate! We have a large user base. We are an industry leader! Choose Lead4Pass to pass the exam with ease!

why lead4pass


It’s not easy to pass the Cisco 010-151 exam, but with accurate learning materials and proper practice, you can crack the exam with excellent results. https://www.lead4pass.com/010-151.html provides you with the most relevant learning materials that you can use to help you prepare.