Month: October 2017

[New Cisco Exam Dumps] 100% Pass With Latest Cisco 200-105 Dumps PDF Training Materials And VCE Youtube Update

Posted on | by admin

Are You Want To Pass Cisco 200-105 dumps in the first attempt? “Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)”is the name of Cisco 200-105 exam dumps which covers all the knowledge points of the real Oracle exam. The best Cisco ICND2 200-105 dumps exam questions study guide 100% pass with a high score. https://www.leads4pass.com/200-105.html dumps exam practice materials free try. High quality Cisco ICND2 200-105 dumps exam questions and answers free update, pass Cisco 200-105 exam test easily. Lead4pass Cisco 200-105 dumps exam questions answers are updated (204 Q&As) are verified by experts.

Latest Cisco 200-105 dumps pdf training materials free download: https://drive.google.com/open?id=0B_7qiYkH83VRS3BsT2duT3pTSlU

Latest Cisco 200-150 dumps pdf training materials free download: https://drive.google.com/open?id=0B_7qiYkH83VRNFFRMURQbmZ4T1U

Vendor: Cisco
Certifications: ICND2
Exam Name: Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)
Exam Code: 200-105
Total Questions: 204 Q&As
200-105 dumps
QUESTION 1
When the enterprise-based authentication method is used for WPA2, a bidirectional handshake exchange occurs between the client and the authenticator.
Which five options are results of that exchange being used on a controller-based network? (Choose five.)
A. a bidirectional exchange of a nonce used for key generation
B. binding of a Pairwise Master Key at the client and the controller
C. creation of the Pairwise Transient Key
D. distribution of the Group Transient Key
E. distribution of the Pairwise Master key for caching at the access point
F. proof that each side is alive
Correct Answer: A,B,C,D,F

QUESTION 2
Which type of management tasks can be completed on a Cisco WLC remotely from a wireless client?
A. All management and configuration tasks can be performed from a wireless client except for using debug commands.
B. In the default configuration, no management or configuration is possible through the GUI or CLI on the Cisco WLC.
C. The default configuration of the Cisco WLC allows only CLI access and then only the use of show commands, so no configuration is possible.
D. All management and configuration tasks, except uploads from and downloads to the Cisco WLC, are permitted.
Correct Answer: B

QUESTION 3
The network administrator wants an access point to be able to find rogue APs and to support location-based services. 200-105 dumps Which AP mode meets this requirement while having the radios up and preventing client connections?
A. monitor
B. sniffer
C. rogue-detection
D. H-REAP
Correct Answer: A

QUESTION 4
Which architecture is used to divide the roles between the access point and the WLC when deploying a centralized wireless solution?
A. Split MAC
B. CAPWAP
C. LWAPP
D. Local MAC
Correct Answer: A

QUESTION 5
Which statement about customization of a web page that is used on a WLC to authorize guest users is true?
A. The administrator can use either a modified internal login page or the customized web page.
B. The administrator can use only the internal login page, and only the organization logo can be changed.
C. The administrator can use only the internal login page with a customized logo, headline, and message.
D. The administrator can use only the customized web page that is uploaded to a WLC.
Correct Answer: A

QUESTION 6
DRAG DROP
Select and Place:
200-105 dumps
Correct Answer:
200-105 dumps
QUESTION 7
A network administrator is troubleshooting an EIGRP problem on a router and needs to confirm the IP addresses of the devices with which the router has established adjacency. 200-105 dumps The retransmit interval and the queue counts for the adjacent routers also need to be checked. What command will display the required information?
A. Router# show ip eigrp adjacency
B. Router# show ip eigrp topology
C. Router#show ip eigrp interfaces
D. Router#show ip eigrp neighbors
Correct Answer: D

QUESTION 8
Which Cisco program for WLAN client vendors helps to ensure that their devices are interoperable with Cisco WLAN infrastructure?
A. CCX
B. CCMP
C. ASDM
D. WLSE
Correct Answer: A

QUESTION 9
Which statement describes spread spectrum technology in wireless communications?
A. Signal is spread across optical pulses.
B. Signal is spread across variations of amplitudes.
C. Signal is spread across one frequency.
D. Signal is spread across a whole band of frequencies.
Correct Answer: D

QUESTION 10
What can be done to secure the virtual terminal interfaces on a router? (Choose two.)
A. Administratively shut down the interface.
B. Physically secure the interface.
C. Create an access list and apply it to the virtual terminal interfaces with the access-group command.
D. Configure a virtual terminal password and login process.
E. Enter an access list and apply it to the virtual terminal interfaces using the access-class command.
Correct Answer: DE

QUESTION 11
An engineer has been asked to upgrade the FUS on the Wireless LAN controller. How can they monitor the status of the upgrade?
A. WLC GUI
B. WLC CLI
C. WLC Console
D. WLC Management in Prime Infrastructure
Correct Answer: C

QUESTION 12
The network administrator receives complaints of slow wireless network performance and performs a sniffer trace of the wireless network in preparation for migration to 802.11n. 200-105 dumps The sample capture shows frames that contains AP beacons with NonERP_Present bit set to 1 and frames with RTS/CTS.
Which two conclusions can be interpreted from these frames? (Choose two.)
A. The network is performing slowly because 802.11n clients are already mixed with 802.11g clients.
B. The network is performing slowly because 802.11b clients still exist in the network.
C. The network is performing slowly because a wireless client is incorrectly configured, which results in RF interference.
D. Possible 802.11b wireless clients are located only in the AP cell radius where the sniffer capture was performed.
E. Possible 802.11b wireless clients could be located anywhere in the wireless network.
Correct Answer: B,E

Reference: https://www.leads4pass.com/200-105.html dumps exam practice materials and study guides free update.

Watch the video to learn more: https://youtu.be/hZ-2ufhcg6s

[New Cisco Exam Dumps] High Quality Cisco 200-355 Dumps PDF Training Resources And Youtube Free Update

Posted on | by admin

High quality Cisco CCNA Wireless 200-355 dumps pdf training resources and dumps vce youtube free demo. Update latest Cisco CCNA Wireless 200-355 dumps exam questions and answers free try from lead4pass. https://www.leads4pass.com/200-355.html dumps exam practice files. The best Cisco CCNA Wireless 200-355 dumps pdf training materials and study guides free download, 100% success and guarantee to pass Cisco 200-355 exam test easily.

High quality Cisco 200-355 dumps pdf training resources: https://drive.google.com/open?id=0B_7qiYkH83VRM01sZjQ2dUtRckU

High quality Cisco 400-351 dumps pdf training resources: https://drive.google.com/open?id=0B_7qiYkH83VRV1NkNFZ3SW80UVU

Vendor: Cisco
Certifications: CCNA Wireless
Exam Name: Implementing Cisco Wireless Network Fundamentals
Exam Code: 200-355
Total Questions: 378 Q&As
200-355 dumps
QUESTION 1
When an AP, in its default configuration mode, connects to a Cisco WLC, which methods are available forremote management access to an AP?
A. SSL and SSH are available only after configuration by a Cisco WLC version 7.0.
B. SSH only
C. HTTPS, and SSH
D. SSH and Telnet
E. SSH and Telnet are available only after configuration by a Cisco WLC version 7.0.
Correct Answer: D

QUESTION 2
A lightweight AP has been deployed in local mode in a network that consists of 10 wireless LAN controllers in a single mobility group. The AP has been configured to use primary, secondary, and tertiary Cisco WLCs. Due to a major power failure, all those Cisco WLCs are unavailable.
Which step does the AP take next?
A. The AP reboots and repeatedly attempts to join the configured primary, secondary, and tertiary Cisco WLCs in that order. The process continues until one of the configured Cisco WLCs is available.
B. The AP attempts to join a Cisco WLC configured as a master controller.
C. The AP attempts to join the Cisco WLC that has the greatest capacity available.
D. The AP state transitions to AP Fallback Mode and continues to provide limited WLAN services (that is, no new client authentications) until a Cisco WLC is available.
Correct Answer: B

QUESTION 3
A customer is reviewing Cisco Prime Infrastructure to identify malicious rogue access points that are operating within the customer environment. 200-355 dumps Which dashboard in Cisco Prime Infrastructure displays this information by default?
A. Context Aware
B. CleanAir
C. Security
D. General
Correct Answer: C

QUESTION 4
What must be done for Cisco WLC and Cisco WCS to communicate?
A. The IP address and subnet mask of the Cisco WLC must be configured in the Cisco WCS.
B. The IP address and subnet mask of the Cisco WCS must be configured in the Cisco WLC.
C. The identity certificate of the Cisco WLC must be added to the Cisco WCS.
D. The Cisco WLC and Cisco WCS must exchange identity certificates.
Correct Answer: A

QUESTION 5
Which architecture is used to divide the roles between the access point and the WLC when deploying a centralized wireless solution?
A. Split MAC
B. CAPWAP
C. LWAPP
D. Local MAC
Correct Answer: A

QUESTION 6
200-355 dumps
Refer to the exhibit. The wireless engineer has deployed the Cisco 5508 Wireless Controller. The controller is responding on the service port; however, it will not respond on the management interface. 200-355 dumps
Which configuration revision will fix the management interface?
A. On the switch interface, configure switch(config-if)#switchport trunk allowed vlan add 10.
B. On the WLC management interface, disable LAG on the management network.
C. On the switch interface, configure switch(config-if)#switchport trunk allowed vlan 10.
D. On the WLC management interface, change the VLAN ID to 20.
E. On the switch interface, configure no spanning-tree portfast trunk.
F. On WLC Controller > General, disable LAG and reboot.
Correct Answer: A

QUESTION 7
Which Cisco AnyConnect module allows troubleshooting for core Cisco AnyConnect problems?
A. telemetry
B. web security
C. VPN
D. NAM
E. DART
F. posture
G. CSSC
Correct Answer: E

QUESTION 8
The administrator needs to create a report that shows all controllers, APs, and Cisco 3300 Series MSEs in the WLAN, including hardware and software information. Which report includes this information?
A. Device > Inventory
B. Mesh > Nodes
C. Network Summary > Executive Summary
D. Network Summary > 802.11 Summary
Correct Answer: A

QUESTION 9
Which two statements about the requirements to configure inter-controller roaming are true? (Choose two.)
A. The same mobility domain names are configured across controllers.
B. The same RF group names are configured across controllers.
C. The same controller hardware version is configured across controllers.
D. The same AP manager interface is configured across controllers.
E. The same virtual interface is configured across controllers.
F. The same controller software version is configured across controllers.
Correct Answer: AE

QUESTION 10
Which two Cisco WLC management-access methods are available as the default setting? 200-355 dumps (Choose two.)
A. SSH
B. HTTPS
C. Telnet
D. HTTP
Correct Answer: AB

QUESTION 11
During the deployment of a wireless network for data and location services, an engineer is to fine-tune the location services. What is this type of survey called?
A. passive fingerprinting
B. passive calibrating
C. active fingerprinting
D. active calibrating
Correct Answer: A

QUESTION 12
The network administrator receives complaints of slow wireless network performance and performs a sniffer trace of the wireless network in preparation for migration to 802.11n. The sample capture shows frames that contains AP beacons with NonERP_Present bit set to 1 and frames with RTS/CTS.
Which two conclusions can be interpreted from these frames? (Choose two.)
A. The network is performing slowly because 802.11n clients are already mixed with 802.11g clients.
B. The network is performing slowly because 802.11b clients still exist in the network.
C. The network is performing slowly because a wireless client is incorrectly configured, which results in RF interference.
D. Possible 802.11b wireless clients are located only in the AP cell radius where the sniffer capture was performed.
E. Possible 802.11b wireless clients could be located anywhere in the wireless network.
Correct Answer: BE

Reference: https://www.leads4pass.com/200-355.html dumps pdf training materials and study guides free update.

Watch the video to learn more: https://youtu.be/0TGsAsPt8uQ

[New Cisco Exam Dumps] Latest Cisco 200-125 Dumps PDF Questions And Answers Youtube Update Free Try

Posted on | by admin

Lead4pass offers latest Cisco CCNA 200-125 dumps exam questions and answers download free try. Get the best Cisco CCNA 200-125 dumps pdf practice files and dumps vce youtube update free demo. https://www.leads4pass.com/200-125.html dumps exam training resources. High quality Cisco CCNA 200-125 dumps exam training materials and study guides, pass Cisco 200-125 exam test easily at the first time.

Latest Cisco 200-125 dumps pdf questions and answers: https://drive.google.com/open?id=0B_7qiYkH83VRSnZDMkVUWDJzLWM

Latest Cisco 200-105 dumps pdf questions and answers: https://drive.google.com/open?id=0B_7qiYkH83VRS3BsT2duT3pTSlU

Vendor: Cisco
Certifications: CCNA
Exam Name: CCNA Cisco Certified Network Associate CCNA (v3.0)
Exam Code: 200-125
Total Questions: 966 Q&As

QUESTION 1
Under normal operations, cisco recommends that you configure switch ports on which vlan?
A. on the default vlan
B. on the management vlan
C. on the native vlan
D. on any vlan except the default vlan
Correct Answer: D

QUESTION 2
Which function does IP SLA ICMP ECHO operation perform to assist with troubleshooting
A. packet-loss detection
B. congestion detection
C. hop-by-hop response time
D. one way jitter measurement
Correct Answer: C

QUESTION 3
Which command can you enter to display the operational status of the network ports on a router? 200-125 dumps
A. show interface switchport
B. show ip interface brief
C. show running-config interface fastethernet 0/1
D. show interface status
Correct Answer: B

QUESTION 4
If a router has 3 hosts connected in one port and two other hosts connected in another port, how may broadcast domains are present on the router?
A. 5
B. 2
C. 3
D. 4
Correct Answer: B

QUESTION 5
Three switches are connected to one another via trunk ports. Assuming the default switch configuration, which switch is elected as the root bridge for the spanning-tree instance of VLAN 1?
A. the switch with the highest MAC address
B. the switch with the lowest MAC address
C. the switch with the highest IP address
D. the switch with the lowest IP address
Correct Answer: B

QUESTION 6
Refer to the exhibit.
200-125 dumps
Switch port FastEthernet 0/24 on ALSwitch1 will be used to create an IEEE 802.1Q- compliant trunk to another switch. Based on the output shown, what is the reason the trunk does not form, 200-125 dumps even though the proper cabling has been attached?
A. VLANs have not been created yet.
B. An IP address must be configured for the port.
C. The port is currently configured for access mode.
D. The correct encapsulation type has not been configured.
E. The “no shutdown” command has not been entered for the port.
Correct Answer: C

QUESTION 7
Which type of mac address is aged automatically by the switch?
A. Dynamic
B. Static
C. automatic
D. manual
Correct Answer: A

QUESTION 8
Which Cisco platform can verify ACLs?
A. Cisco Prime Infrastructure
B. Cisco Wireless LAN Controller
C. Cisco APIC-EM
D. Cisco IOS-XE
Correct Answer: C

QUESTION 9
What are two benefits of private IPv4 IP addresses? (Choose two.)
A. They are routed the same as public IP addresses.
B. They are less costly than public IP addresses.
C. They can be assigned to devices without Internet connections.
D. They eliminate the necessity for NAT policies.
E. They eliminate duplicate IP conflicts.
Correct Answer: AC

QUESTION 10
Which command is necessary to permit SSH or Telnet access to a cisco switch that is otherwise configured for these vty line protocols?
A. transport type all
B. transport output all
C. transport preferred all
D. transport input all
Correct Answer: D

QUESTION 11
In which three ways is an IPv6 header simpler than an IPv4 header? 200-125 dumps (Choose three.)
A. Unlike IPv4 headers, IPv6 headers have a fixed length.
B. IPv6 uses an extension header instead of the IPv4 Fragmentation field.
C. IPv6 headers eliminate the IPv4 Checksum field.
D. IPv6 headers use the Fragment Offset field in place of the IPv4 Fragmentation field.
E. IPv6 headers use a smaller Option field size than IPv4 headers.
F. IPv6 headers use a 4-bit TTL field, and IPv4 headers use an 8-bit TTL field.
Correct Answer: ABC

QUESTION 12
Which three statements about static routing are true? (Choose three.)
A. It uses consistent route determination.
B. It is best used for small-scale deployments.
C. Routing is disrupted when links fail.
D. It requires more resources than other routing methods.
E. It is best used for large-scale deployments.
F. Routers can use update messages to reroute when links fail.
Correct Answer: ABC

Read more: https://www.leads4pass.com/200-125.html dumps practice questions and answers update free demo.

Watch the video to learn more: https://youtu.be/nF4Ul2viODM