Month: August 2022

Cisco 200-901 dumps

The newly updated Cisco 200-901 dumps contain 294 exam questions and answers that candidates can study using the 200-901 dumps PDF and 200-901 dumps VCE to help you successfully pass the 200-901 DEVASC exam.

You are welcome to download the latest Cisco 200-901 dumps: https://www.leads4pass.com/200-901.html, leads4pass 200-901 dumps serve all candidates taking the 200-901 DEVASC exam and guarantee you 100% Successfully passed the 200-901 DEVASC exam.

Download the Cisco 200-901 PDF for free sharing online:

https://drive.google.com/file/d/1AkWXg5-Qk0gvCgce5S3eHXAZg3u5YeOy/
https://drive.google.com/file/d/1nz9bXXwRZmjYcNw5n-BdNgmIOoFoQRVu/
https://drive.google.com/file/d/1hqDUcvc1vHJMiDa15KhDD1Jjp3q8j0hA/

Share the latest Cisco 200-901 dumps exam questions and answers for free

New Question 1:

How does requesting a synchronous API operation differ from requesting an asynchronous API operation?

A. clients receive responses with a task id for further processing

B. clients subscribe to a webhook for operation results

C. clients poll for the status of the execution of operations

D. clients can access the results immediately

Correct Answer: C


New Question 2:

What are two advantages of YANG-based approaches for infrastructure automation? (Choose two.)

A. multi-platform vendor abstraction

B. compiles to executables that run on network devices

C. designed to reflect networking concepts

D. directly maps to JavaScript

E. command line driven interface

Correct Answer: AC


New Question 3:

Which device is used to transport traffic from one broadcast domain to another broadcast domain?

A. layer 2 switch

B. proxy server

C. router

D. load balancer

Correct Answer: C


New Question 4:

Which service provides a directory lookup for IP addresses and host names?

A. DNS

B. NAT

C. SNMP

D. DHCP

Correct Answer: A


New Question 5:

Users cannot access a webserver and after the traffic is captured, the capture tool shows an ICMP packet that reports “time exceeded in-transit”. What is the cause of this webserver access issue?

A. A router along the path has the wrong time.

B. A router along the path is misrouting the packets in the wrong direction.

C. The server is too loaded and the connection could not be handled in time.

D. The server is too far away and the packets require too much time to reach it.

Correct Answer: B


New Question 6:

What is used in Layer 2 switches to direct packet transmission to the intended recipient?

A. MAC address

B. IPv6 address

C. spanning tree D. IPv4 address

Correct Answer: A


New Question 7:

Users cannot access a webserver and after the traffic is captured, the capture tool shows an ICMP packet that reports “communication administratively prohibited”. What is the cause of this webserver access issue?

A. An access list along the path is blocking the traffic.

B. Users must authenticate on the webserver to access it.

C. A router along the path is overloaded and thus dropping traffic.

D. The traffic is not allowed to be translated with NAT and dropped.

Correct Answer: A


New Question 8:

What is an advantage of a version control system?

A. facilitates resolving conflicts when merging code

B. ensures that unit tests are written

C. prevents over-writing code or configuration files

D. forces the practice of trunk-based development

Correct Answer: A


New Question 9:

Refer to the exhibit.

What is the result of executing this Ansible playbook?

A. The playbook copies a new start-up configuration to CISCO_ROUTER_01

B. The playbook copies a new running configuration to CISCO_ROUTER_01

C. The playbook backs up the running configuration of CISCO_ROUTER_01

D. The playbook backs up the start-up configuration of CISCO_ROUTER_01

Correct Answer: D


New Question 10:

A 401 HTTP response code is returned when calling a REST API. What is the error state identified by this response code?

A. The server cannot process the request as it has detected an issue in the request syntax or body.

B. The request has not been accepted because it requires authentication.

C. The sever accepted the request but the client is not authorized for this content.

D. The server cannot find the requested resource because the path specified is incorrect.

Correct Answer: B


New Question 11:

What is the first development task in test-driven development?

A. Write code that implements a desired function.

B. Write a failing test case for a desired function.

C. Reverse engineer the code for a desired function.

D. Write a passing test case for existing code.

Correct Answer: B

Reference: https://technologyconversations.com/2013/12/20/test-driven-development-tdd-example- walkthrough/


New Question 12:

What is the purpose of a firewall in application deployment?

A. adds TLS support to an application that does not support it natively

B. limits traffic to only ports required by the application

C. provides translation for an application\’s hostname to its IP address

D. forwards traffic to a pool of instances of the application

Correct Answer: B


New Question 13:

A small company has 5 servers and 50 clients. What are two reasons an engineer should split this network into separate client and server subnets? (Choose two.)

A. Subnets will split domains to limit failures.

B. A router will limit the traffic types between the clients and servers.

C. Subnets provide more IP address space for clients and servers.

D. A router will bridge the traffic between clients and servers.

E. Internet access to the servers will be denied on the router.

Correct Answer: AB


New Question 14:

How does a developer create and switch to a new branch called “my-bug-fix” to develop a product fix?

A. git checkout -b my-bug-fix

B. git branch -b my-bug-fix

C. git branch my-bug-fix

D. git checkout my-bug-fix

Correct Answer: C

Reference: https://www.dnnsoftware.com/community-blog/cid/155105


New Question 15:

What operation is performed with YANG model-driven programmability in NX-OS?

A. configure a device with native and OpenConfig-based models

B. bootstrap a device that has a factory-default configuration

C. send CLI commands to a device and retrieve output in JSON format

D. run Linux commands natively on the device

Correct Answer: A

The above is only a part of Cisco 200-901 dumps exam questions and answers, you can use the above exam questions and answers to improve yourself, not only that, we welcome you to download the latest
Cisco 200-901 dumps exam questions: https://www.leads4pass.com/200-901.html (Total Questions: 294 Q&A), help you truly pass the 200-901 DEVASC exam.

More IT certification blogs: [Amazon]awsexamdumps.com, [Oracle]oraclefreedumps.com, [Cisco]ciscofreedumps.com, [Microsoft]examdumpsbase.com, [Citrix]citrixexamdumps.com
[CompTIA]comptiafreedumps.com, [VMware]vmwarefreedumps.com, [IBM]ibmexamdumps.com, [HP]hpexamdumps.com, [NetApp]netappexamdumps.com, [Juniper]juniperexamdumps.com
[Fortinet]fortinetexamdumps.com

Where do I get the Cisco 010-151 exam questions? ExamineeVeryThing shares the latest and most effective Cisco CCT Data Center 010-151 exam questions and answers, online practice tests, and the most authoritative Cisco exam experts update 010-151 exam questions throughout the year.
Get the full 010-151 exam dumps selection: https://www.leads4pass.com/010-151.html (72 Q&As)[Updated 2022 Total Questions: 136 Q&A]. Pass the exam with ease!

Cisco 010-151 Exam Video

Table of Contents:

Latest Cisco CCT Data Center 010-151 google drive

[PDF] Free Cisco 010-151 pdf dumps download from Google Drive: https://drive.google.com/open?id=1q-BVVW4uYdXXeS_wL1gZQPx3m3tYgvEV

010-151 DCTECH – Cisco๏ผšhttps://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/dctech.html

The Cisco Certified Technician (CCT) for Data Center validates a technician’s competency in the following areas;

  • Basic Cisco NX-OS configuration
  • Cisco Data Center products and hardware components with an emphasis on the Cisco Unified Computing System (UCS).

The curriculum covers remedial services (HW break-fix) on Cisco Data Center products, including hardware replacement, software, and configuration backup and restores, check the safety and environmental requirement, recognize connection type and cable requirement,
and perform basic physical layer troubleshooting. The Cisco Certified Technician (CCT) should be competent in the following areas;
basic Cisco NX-OS configuration, Cisco Data Center products, and hardware components.

The Cisco Certified Technician should be able to perform remedial services (HW break-fix) on Cisco Data Center products, including software and configuration backup and restore, check the safety and environmental requirement, recognize connection type and cable requirement, and perform basic physical layer troubleshooting.

[Updated 2022] 010-151 Dumps exam questions and answers

Question 1:

Which method does FCIP use to enable connectivity of geographically distributed Fibre Channel SANs over IP?

A. routing

B. tunneling

C. handshaking

D. transporting

Correct Answer: B

Question 2:

Which fiber optic cable type is used most often with a Subscriber connector?

A. dual-mode

B. single-mode

C. straight-mode

D. multi-mode

E. subscriber-mode

Correct Answer: B

Question 3:

Which type of connection across the network does a SAN allow for multiple servers to access an unlimited amount of storage devices?

A. any-to-many

B. many-to-any

C. any-to-any

D. any-to-one

E. one-to-any

F. one-to-one

Correct Answer: C

Question 4:

Which two statements about PCIe are true? (Choose two.)

A. The PCIe link is built around dedicated unidirectional couples of serial, point-to-point connections known as lanes.

B. You can install a PCI Express x8 adapter into an x4 slot.

C. The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path.

D. The PCIe 1.0 standard doubles the transfer rate compared to PCIe 2.0.

E. A link that is composed of four lanes is called an x4 link.

Correct Answer: AE

Question 5:

Where do you find the model number of a Cisco MDS 9200 Series chassis?

A. on the top front of the chassis next to the serial number

B. on the bottom front of the chassis next to the Cisco logo

C. on the top front of the chassis next to the Cisco logo

D. on the bottom front of the chassis next to the serial number

Correct Answer: C

[Updated 2022] Get more Cisco 010-151 exam questions and answers

Latest updates Cisco 010-151 exam practice questions

QUESTION 1
What is the maximum number of supervisor modules that the Cisco MDS 9710 Switch supports?
A. 1
B. 2
C. 4
D. 6
E. 8
Correct Answer: B

QUESTION 2
Which two statements about DIMM replacement in Cisco UCS Servers are true? (Choose two.)
A. In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel.
B. Rack-mount and blade servers have memory fault LEDs that indicate which DIMM requires attention.
C. In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on).
D. If the memory in a server is not fully populated, you can install DIMMs in any open slot.
Correct Answer: AC

QUESTION 3
Which two statements about the Ethernet media are true? (Choose two.)
A. A twisted-pair cable system has each pair of wires twisted together to reduce electromagnetic interference.
B. Compared to multimode fiber, the single-mode fiber is designed for shorter distances with higher cost.
C. 40 Gigabit Ethernet twinax cables deploy Enhanced Quad Small Form Factor Pluggable (QSFP+) connectors.
D. The twinax cables can be found in either a shielded twisted-pair or an unshielded twisted-pair variation.
Correct Answer: AC

QUESTION 4
Which Cisco NX-OS command displays kernel uptime?
A. show module
B. show version
C. show license
D. show boot
E. show interface
Correct Answer: B

QUESTION 5
Which command-line interface mode is best described by this prompt?
UCS-switch-A (nxos)#
A. maintenance mode
B. EXEC mode
C. local management mode
D. global configuration mode
E. Cisco IOS mode
Correct Answer: B

QUESTION 6
What is the maximum distance that the 40GBASE-LR4 Ethernet standard can span?
A. 550 m
B. 10 km
C. 40 km
D. 80 km
Correct Answer: B

QUESTION 7
Refer to the exhibit.leads4pass 010-151 exam question q7

Where is the best place to see the power supply status of the blade server enclosure?
A. A – Chassis 1
B. B – Chassis 1 – PSUs
C. C – Chassis1 – Servers
D. D – Rack-Mounts – Servers
E. E – Fabric Interconnects A – PSUs
Correct Answer: B

QUESTION 8
Which Cisco Nexus 5000 Series model supports 1/10G BASE-T ports?
A. Cisco Nexus 5548P
B. Cisco Nexus 5548UP
C. Cisco Nexus 5596UP
D. Cisco Nexus 5596T
Correct Answer: D

QUESTION 9
Which two statements about the Cisco Nexus 5596UP switch are true? (Choose two.)
A. Its power supplies and fan trays are hot-swappable.
B. It supports unified ports.
C. It is offered in a one-rack-unit form factor.
D. It has one expansion slot.
E. It supports up to 96 10G BASE-T ports.
Correct Answer: AB

QUESTION 10
Refer to the exhibit.leads4pass 010-151 exam question q10

Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?
A. MDS 9509
B. MDS 9513
C. MDS 9710
D. MDS 9506
Correct Answer: C

QUESTION 11
The Ethernet specification details several different fiber optic media types. What is the wire transmission speed for
100BASE-FX Ethernet?
A. 10 Mb/s
B. 100 Mb/s
C. 1000 Mb/s
D. 10000 Mb/s
Correct Answer: B

QUESTION 12
Which device provides analysis of Fibre Channel traffic without any network disruption?
A. Cisco MDS 9000 Data Analyzer Adapter
B. Cisco MDS 9000 Port Analyzer Adapter
C. Cisco MDS 9000 Channel Analyzer Device
D. Cisco MDS 9000 Channel Analyzer Adapter
Correct Answer: B

QUESTION 13
Which action should the administrator take before physically removing a blade server for maintenance or replacement?
A. Force the server to shut down.
B. Disassociate the service profile.
C. Decommission the server.
D. Perform a graceful shutdown of the server.
Correct Answer: C

Related 010-151 Popular Exam resources

title pdf youtube Cisco leads4pass leads4pass Total Questions
Cisco CCT Data Center leads4pass 010-151 dumps pdf leads4pass 010-151 youtube 010-151 DCTECH – Cisco https://www.leads4pass.com/010-151.html 136 Q&A

leads4pass Year-round Discount Code

leads4pass coupon

What are the advantages of leads4pass?

leads4pass employs the most authoritative exam specialists from Cisco, Microsoft, CompTIA, IBM, EMC, etc. We update exam data throughout the year. Highest pass rate! We have a large user base. We are an industry leader! Choose leads4pass to pass the exam with ease!

why leads4pass

Summarize:

It’s not easy to pass the Cisco 010-151 exam, but with accurate learning materials and proper practice, you can crack the exam with excellent results. https://www.leads4pass.com/010-151.html provides you with the most relevant learning materials that you can use to help you prepare.